930M Ag Handler Small Wheel Loader
930M Ag Handler Small Wheel Loader
930M Ag Handler Small Wheel Loader
930M Ag Handler Small Wheel Loader

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Get Pricing
Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*) 141 HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160 HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*) 158 HP
Engine Model Cat® C7.1
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*) 154 HP
Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 162 HP
Maximum Gross Power 168 HP
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 592 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4) 572 ft·lbf
Displacement (Standard Power Mode: Speed Range 1-3*) 427 in³
Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4) 157 HP
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
Displacement (Performance Power Mode: Speed Range 1-4) 427 in³
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4) 162 HP
Emissions Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*) 572 ft·lbf
Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4) 143 HP
Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*) 566 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 592 ft·lbf
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 170 HP
Note (2) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
Note (3) *Range 4 power is boosted to be the same as Performance Mode.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168 HP
Note (1) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4) 566 ft·lbf
Bucket Capacities 3.1-5.0 m3 (4.0-6.5 yd3)
Bucket Capacities - Light Material 3.1-5.0 m3 (4.0-6.5 yd3)
Operating Weight 31876 lb
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (2) *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
Reach - Bucket at 45°* 4.67 ft
Turning Radius - Inside of Tires 9.33 ft
Rack Angle at Full Lift 51 degrees
Dump Angle at Full Lift 44 degrees
Departure Angle 33 degrees
Breakout* 17246 lb
Tipping Load - Straight - ISO 14397-1* 16070 lb
Clearance - Level Bucket** 13.33 ft
Clearance - Bucket at 45° * 10.17 ft
Length - Wheel Base 9.83 ft
Width - Over Tires 8.33 ft
Rack Angle at Carry 48 degrees
Length - Overall* 27.58 ft
Width - Bucket 9 ft
Length - Hitch to Front Axle 4.92 ft
Turning Radius - Outside of Tires 17.67 ft
Articulation Angle 40 degrees
Dig Depth** 5.3 in
Clearance - Loadover Height** 11.58 ft
Turning Radius - Over Bucket 21.92 ft
Height - Ground to Beacon** 12.08 ft
Height - Overall** 19 ft
Operating Weight* 32136 lb
Carry Height - Bucket Pin 2 ft
Tipping Load - Full Turn - ISO 14397-1* 13592 lb
Height - Ground to Cab** 10.92 ft
Height - Bucket Pin** 14.42 ft
Width - Tread Center 6.25 ft
Length - Rear Axle to Bumper 6.5 ft
Note (2) **Vary with tire.
Height - Ground Axle Center** 2.17 ft
Note (1) *Vary with bucket.
Height - Ground Clearance** 1.25 ft
Note (3) Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Relief Pressure - Tilt Cylinder 4351 psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time 8.2 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time 7.5 s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 4061 psi
Maximum Flow - Implement Pump 50 gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min
Maximum Flow - Implement Pump - 3rd Function* 50 gal/min
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height 1.6 s
Note *Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level 1.8 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level 1.8 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 4061 psi
Maximum Working Pressure - Implement Pump 4061 psi
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift 4.3 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height 1.4 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift 4.8 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5 turns
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed 2.4 s
Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf
Maximum Flow - Steering Pump 34 gal/min
Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
Maximum Working Pressure - Steering Pump 3500 psi
Steering Articulation Angle - Each Direction 40°
Standard Size 20.5 R25, radial (L-3)
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Other Choices Include 20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
Dig Depth** 5.3 in
Height - Bucket Pin** 14.42 ft
Tipping Load - Straight - ISO 14397-1* 16430 lb
Turning Radius - Over Bucket 20.92 ft
Length - Overall* 27.25 ft
Clearance - Level Bucket** 13.33 ft
Height - Ground Clearance** 1.25 ft
Height - Overall** 18.67 ft
Clearance - Bucket at 45° * 10.42 ft
Rack Angle at Carry 48 degrees
Note (2) **Vary with tire.
Breakout* 18808 lb
Length - Wheel Base 9.83 ft
Dump Angle at Full Lift 44 degrees
Operating Weight* 31876 lb
Width - Tread Center 6.25 ft
Length - Rear Axle to Bumper 6.5 ft
Reach - Bucket at 45°* 4.42 ft
Height - Ground Axle Center** 2.17 ft
Width - Over Tires 8.33 ft
Articulation Angle 40 degrees
Width - Bucket 9 ft
Tipping Load - Full Turn - ISO 14397-1* 13934 lb
Turning Radius - Inside of Tires 9.33 ft
Rack Angle at Full Lift 51 degrees
Turning Radius - Outside of Tires 17.67 ft
Carry Height - Bucket Pin 2 ft
Clearance - Loadover Height** 11.58 ft
Height - Ground to Beacon** 12.08 ft
Height - Ground to Cab** 10.92 ft
Note (1) *Vary with bucket.
Length - Hitch to Front Axle 4.92 ft
Departure Angle 33 degrees
Note (3) Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Transmission - Gear Box 2.2 gal (US)
Cooling System 7.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
Fuel Tank 51.5 gal (US)
Axles - Rear 6.6 gal (US)
Hydraulic System - Including Tank 43.6 gal (US)
Engine Crankcase 5.3 gal (US)
Axles - Front 6.9 gal (US)
Hydraulic Tank 23.8 gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 8 mile/h
Forward and Reverse - Range 4 25 mile/h
Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 3 17 mile/h
Rear Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front Fixed; Locking differential (standard)

Experience hybrid-like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed of just 1,600 rpm in Standard Mode. Power when you need it with Caterpillar's exclusive Power‑by-Range technology that increases power in Range 4 for improved speed on grade. For your toughest and most demanding farm applications a new Performance Mode will allow you to boost the power and hydraulic speed in all Ranges to get the job done even quicker. Meets U.S. EPA Tier 4 Final emission standards with a Cat® C7.1 engine that is designed to manage itself so you can concentrate on your work.

Move more with Caterpillar's patented quick loading Performance Series buckets and High Lift optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to safely and confidently handle loads from bales to silage with precise control. Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer and drive without compromise. A 20% boost in hydraulic speeds on the Ag Handler helps you finish the day on time.

Have a seat in the 930M Ag Handler and enjoy automatic temperature control, class leading sound levels, excellent all around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar's exclusive hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on the farm.

Fine tune machine performance with adjustments at your fingertips through the soft touch buttons and optional secondary touch screen display. Quickly set auxiliary flow to optimize grapple or silage defacer speed, enable auto reversing fan to breathe clean in dusty environments, toggle over to fine mode for improved control when bale stacking, program linkage kick-out positions for easy feed wagon loading, adjust wheel torque to match underfoot conditions when cleaning corrals and customize ride control activation speed for a smooth loaded carry run. The 930M Ag Handler is ready for the challenge on your farm!