D2 Track-Type Tractor
D2 Track-Type Tractor
D2 Track-Type Tractor
D2 Track-Type Tractor

The new Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Get Pricing
Engine Model Cat® C3.6
Power - Net 92 HP
Displacement 220 in³
Net Power - 2,200 rpm - SAE J1349 92 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 92 HP
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power Train  Hydrostatic
Operating Weight 18382 lb
Operating Weight - LGP 19066 lb
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight  18382 lb
FOPS ISO 3449:2005 Level II
ROPS ISO 3471:2008
Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h
Relief Valve Settings 7033 psi
Maximum Travel Speed - Reverse 6.2 mile/h
Track Motors 2
Length - Track on Ground - LGP 89 in
Track Gauge 61 in
Number of Rollers - Each Side 7
Track Gauge - LGP 68 in
Ground Pressure - LGP 4.3 psi
Shoe Width - Standard 18 in
Shoe Width - LGP 25 in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Number of Shoes - Each Side - Abrasion Undercarriage  38
Ground Pressure  5.7 psi
Length of Track on Ground  89 in
Fuel Tank 51.5 gal (US)
Crankcase - With Filter 2.8 gal (US)
Final Drive - Each - LGP 2.6 gal (US)
Cooling System 5 gal (US)
Transmission - Hydraulic Tank 23.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)
Final Drives - Each Side  2.6 gal (US)
Pump Output 17.2 gal/min
Relief Valve Settings 2988 psi
Type Parallelogram
Number of Shanks 3
Height 6.5 in
Weight 1222 lb
Maximum Digging Depth 13.3 in
Maximum Ground Clearance Under Tip 17.6 in
Overall Width 67.3 in
Maximum Reach - Ground Line 30.2 in
Weight 1345 lb
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Overall Width 29.2 in
Winch Length 27.76 in
Maximum Line Pull - Bare Drum 40000 lb
Throat Clearance 6.75 in
Rope Diameter - Recommended 0.63 in
Drum Capacity - Optional Cable 256 ft
Maximum Line Speed - Bare Drum 131 ft/min
Drum Capacity - Recommended Cable 371 ft
Rope Diameter - Optional 0.75 in
Maximum Line Pull - Full Drum 25000 lb
Drum Diameter 10 in
Maximum Line Speed - Full Drum 207 ft/min
Drum Width 10.8 in
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
BLADE: Digging Depth - LGP 23.2 in
BLADE: Blade Width - Intermediate 115 in
Length - Basic Tractor - Without Blade - LGP 129.5 in
BLADE: Maximum Angle (either side) - Intermediate 25°
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Blade Lift Height - LGP 27.9 in
BLADE: Maximum Tilt - Intermediate 17.7 in
BLADE: Digging Depth - Intermediate 23.2 in
BLADE: Blade Lift Height - Intermediate 29.3 in
BLADE: Blade Width - LGP 124 in
Width - Tractor - Standard Shoes - No Blade - LGP 92.9 in
BLADE: Blade Width at Maximum Angle - LGP 113.1 in
Tractor Height - LGP 108.9 in
Track Gauge - LGP 67.9 in
Ground Clearance - LGP 13 in
BLADE: Blade Height - LGP 35.8 in
Overall Length - With Blade - LGP 168.2 in
BLADE: Blade Capacity (SAE) - LGP 2.42 yd³
BLADE: Blade Height - Intermediate 33.9 in
BLADE: Blade Capacity (SAE) - Intermediate 1.96 yd³
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
BLADE: Maximum Tilt - LGP 17.2 in
BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in
BLADE: Maximum Angle (either side) - LGP 25°
Note Abrasion Undercarriage
Width - Tractor - Standard Shoes - No Blade - Standard  79.1 in
BLADE: Maximum Angle (either side) - Standard  25°
Ground Clearance - Standard  13 in
Length - Basic Tractor - Without Blade - Standard  129.5 in
Overall Length - With Blade - Standard  168.5 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
BLADE: Maximum Tilt - Standard  15.2 in
Track Gauge - Standard  61 in
Tractor Height - Standard  108.9 in
BLADE: Digging Depth - Standard  22.5 in
BLADE: Blade Width - Standard  109.5 in
BLADE: Blade Lift Height - Standard  29.3 in
BLADE: Blade Capacity (SAE) - Standard  2.59 yd³
BLADE: Blade Width at Maximum Angle - Standard  100.1 in
BLADE: Blade Height - Standard  39.8 in

  • New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

  • Scalable 2D and 3D Cat Grade provide technologies like Slope Assist, Stable Blade, and Slope Indicate for easier and more efficient operation, as well as the flexibility to adapt different technology based on job site demands.

  • The D2 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.

  • The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

  • This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

  • The D2 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.