New D1 Track-Type Tractor For Sale in Georgia – Yancey Bros. Co.
Yancey Brands
Hotlines
D1 Track-Type Tractor
D1 Track-Type Tractor
D1 Track-Type Tractor
D1 Track-Type Tractor

The new Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Get Pricing
Call 877-OWNACAT
BUY Used Rent
Engine
Engine Model Cat C3.6
Power - Net 80 HP
Displacement 220 in³
Net Power - 2,200 rpm - SAE J1349 80 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power Train  Hydrostatic
Operating Weight  17855 lb
Operating Weight - LGP 18839 lb
Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in 19295 lb
Note (2) For machine with ripper, add 554 kg (1,222 lb).
FOPS ISO 3449:2005 Level II
ROPS ISO 3471:2008
Drive Pumps 1
Maximum Travel Speed - Reverse 6.2 mile/h
Relief Valve Settings 7033 psi
Maximum Travel Speed - Forward 5.6 mile/h
Track Motors 2
Length - Track on Ground - LGP, 762 mm (30 in) 89 in
Length - Track on Ground - LGP 89 in
Track Gauge - LGP 68 in
Shoe Width - LGP, 762 mm (30 in) 30 in
Track Gauge - LGP, 762 mm (30 in) 73 in
Shoe Width - LGP 25 in
Track Gauge 59 in
Shoe Width - Standard 16 in
Ground Pressure - LGP 4.3 psi
Ground Pressure - LGP, 762 mm (30 in) 3.7 psi
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Number of Rollers - Each Side 6
Length of Track on Ground  89 in
Number of Shoes - Each Side - Abrasion Undercarriage  38
Ground Pressure  6.45 psi
Final Drive - Each - LGP 2.6 gal (US)
Cooling System 4.2 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)
Transmission - Hydraulic Tank 23.8 gal (US)
Crankcase - With Filter 2.8 gal (US)
Fuel Tank 51.5 gal (US)
Final Drives - Each Side  2.6 gal (US)
Pump Output 17.2 gal/min
Relief Valve Settings 2988 psi
Type Parallelogram
Number of Shanks 3
Height 6.5 in
Weight 1222 lb
Maximum Ground Clearance Under Tip 17.6 in
Maximum Digging Depth 13.3 in
Overall Width 67.3 in
Maximum Reach - Ground Line 30.2 in
Weight 1345 lb
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 256 ft
Maximum Line Speed - Full Drum 207 ft/min
Rope Diameter - Optional 0.75 in
Maximum Line Pull - Full Drum 25000 lb
Maximum Line Speed - Bare Drum 131 ft/min
Rope Diameter - Recommended 0.63 in
Drum Width 10.8 in
Drum Capacity - Recommended Cable 371 ft
Maximum Line Pull - Bare Drum 40000 lb
Drum Diameter 10 in
Winch Length 27.76 in
Throat Clearance 6.75 in
Overall Width 29.2 in
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
BLADE: Digging Depth - Intermediate 22.5 in
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in) 94.9 in
BLADE: Blade Capacity (SAE) - LGP 2.17 yd³
BLADE: Blade Lift Height - LGP 28.7 in
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in) 129.6 in
BLADE: Maximum Tilt - LGP 17.2 in
BLADE: Blade Width - LGP 124 in
Ground Clearance - LGP 13 in
BLADE: Blade Width at Maximum Angle - LGP 113.1 in
BLADE: Digging Depth - LGP 22.5 in
BLADE: Blade Lift Height - Intermediate 29.3 in
Track Gauge - LGP 67.9 in
Ground Clearance - LGP, 762 mm (30 in) 13 in
Width - Tractor - Standard Shoes - No Blade - LGP 92.9 in
BLADE: Blade Height - LGP 33.8 in
Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in
Track Gauge - LGP, 762 mm (30 in) 73 in
BLADE: Blade Height - Intermediate 33.9 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
Tractor Height - LGP, 762 mm (30 in) 108.9 in
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Blade Capacity (SAE) - Intermediate 1.96 yd³
Length - Basic Tractor - Without Blade - LGP 129.6 in
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in
BLADE: Maximum Tilt - Intermediate 17.7 in
BLADE: Blade Width - Intermediate 115 in
BLADE: Maximum Angle (either side) - Intermediate 25°
Tractor Height - LGP 108.9 in
Overall Length - With Blade - LGP 167.8 in
Note *Abrasion Undercarriage
BLADE: Blade Width at Maximum Angle - Standard  95.2 in
BLADE: Digging Depth - Standard  22.5 in
BLADE: Blade Width - Standard  104.2 in
BLADE: Blade Lift Height - Standard  28.7 in
Ground Clearance - Standard  13 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
Tractor Height - Standard  108.9 in
Length - Basic Tractor - Without Blade - Standard  129.6 in
BLADE: Maximum Angle (either side) - Standard  25°
BLADE: Maximum Tilt - Standard  14.5 in
BLADE: Blade Capacity (SAE) - Standard  1.99 yd³
Track Gauge - Standard  58.9 in
BLADE: Blade Height - Standard  35.8 in
Width - Tractor - Standard Shoes - No Blade - Standard  74.8 in
Overall Length - With Blade - Standard  168 in
IMPROVED VISIBILITY

  • New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

  • Scalable 2D and 3D Cat Grade provide technologies like Slope Assist, Stable Blade, and Slope Indicate for easier and more efficient operation, as well as the flexibility to adapt different technology based on job site demands.
  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica.
  • Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

  • The D1 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.

  • The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

  • This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

  • The D1 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.