New 770 Off-Highway Truck For Sale in Georgia
Yancey Brands
Hotlines
770 Off-Highway Truck
770 Off-Highway Truck
770 Off-Highway Truck
770 Off-Highway Truck

Cat’s 770 40-ton payload sets the standard for haul performance in construction and quarry industries. We’ve taken the best of our rugged, dependable Off-Highway Truck lineup and integrated it with technologies that help our environment, make operators more productive, and dramatically improve the economics of haul fleets. An optimal pass match for the 770 is the Cat 986K or 988K Wheel Loader or the 374F or 390F Hydraulic Excavators. No matter your business type, the 770 is designed to help you move materials safely and efficiently through every haul.

Get Pricing
Call 877-OWNACAT
BUY Used
Engine
Engine Model Cat® C15
Rated Engine Speed 1700 r/min
Gross Power - SAE J1995:2014 515 hp
Net Power - SAE J1349:2011 477 hp
Net Power - ISO 9249 477 hp
Net Power - 80/1269/EEC 489 hp
Engine Power - ISO 14396 508 hp
Net Power - ISO 14396 508 hp
Net Torque - SAE J1349 1579 ft-lb
Number of Cylinders 6
Bore 5.4 in
Stroke 6.7 in
Displacement 927.6 in³
Note (1) The power ratings are tested at the reference conditions for the specified standard.
Note (2) MIN NET SAE J1349:2011/ISO 9249:2007 Net power advertised is the power available at the flywheel when the engine is equipped with fan at maximum speed, alternator, air intake system, and exhaust system.
Emissions Meets U.S. EPA Tier 4 and EU Stage V emission standards.
Target Gross Machine Operating Weight 157000 lb
Chassis Weight 55948 lb
Body Weight 17447 lb
Note (1) Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
Note (2) Body weight is the Flat Floor body with no liner and will vary depending on configuration.
Nominal Payload Class (100%) 41.2 Sh Ton
Top Speed - Loaded 45.8 mile/h
Target Payload (100%) 41.2 Sh Ton
Body Capacity - SAE 2:1 32.9 yd³
Maximum Working Payload (110%) 46.8 ton (US)
Maximum Allowable Payload (120%)* 51 ton (US)
Top Speed - Loaded* 45.8 mile/h
Note Refer to the Caterpillar 10/10/20 Overload Policy for maximum gross machine weight limitations.
Note (1) Capacity with dual slope body with no liner.
Note (2) Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.
Forward - 1 7.4 mile/h
Forward - 2 10.1 mile/h
Forward - 3 13.8 mile/h
Forward - 4 18.5 mile/h
Forward - 5 25.1 mile/h
Forward - 6 33.8 mile/h
Forward - 7 45.9 mile/h
Reverse 9.7 mile/h
Note Maximum travel speeds with standard 18.00R33 (E4) tires.
Differential Ratio 1.92:1
Planetary Ratio 4.80:1
Total Reduction Ratio 9.216:1
Brake Surface - Front 216 in²
Brake Surface - Rear 6235 in²
Brake Standards ISO 3450:2011
Pump Flow - High Idle 112.2 gpm
Relief Valve Setting - Raise 2750 psi
Relief Valve Setting - Lower 500 psi
Body Power Down - High Idle 8.0 seconds (approx.)
Body Raise Time - High Idle 7.5 seconds (approx.)
Body Raise Time - High Idle 7.5 s
Body Lower Time - Float 10 s
Body Power Down - High Idle 10 s
Struck 23.01 yd³
Heaped (SAE 2:1)* 32.9 yd³
Note (1) Contact your local Cat dealer for body recommendation. *ISO 6483:1980
Note (2) *ISO 6483:1980.
Struck 23.01 yd³
Heaped (SAE 2:1)* 32.9 yd³
Note (1) Contact your local Cat dealer for body recommendation. *ISO 6483:1980
Note (2) *ISO 6483:1980.
Front Axle - Empty 52 %
Front Axle - Loaded 34 %
Rear Axle - Empty 48 %
Rear Axle - Loaded 66 %
Empty Loaded Cylinder Stroke Front 9.2 in
Empty Loaded Cylinder Stroke Rear 5.9 in
Rear axle - Oscillation 8.9 °
Sound Standards 78.5 dB(A)
Sound Standards (1) Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Standards (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Standards (3) The machine sound power level is measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 80% of the maximum engine cooling fan speed.
Fuel Tank 210 gal (US)
Cooling System 43.3 gal (US)
Crankcase 24 gal (US)
Differential - Final Drives 37 gal (US)
Steering Tank 9.5 gal (US)
Steering System - Including Tank 14 gal (US)
Brake/Hoist Hydraulic Tank 46.5 gal (US)
Brake Hoist System 85 gal (US)
Torque Converter - Transmission System 18.5 gal (US)
DEF Tank 6 gal (US)
Steering Standards ISO 5010:2019
Steer Angle 40.5 °
Turning Diameter - Front 57.7 ft
Turning Circle - Clearance Diameter 66.6 ft
Standard Tire 18.00R33 (E4)
Note (1) Productive capabilities of the 770 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2) Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.
ROPS Standards Rollover protective structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 for operator and ISO 13459:2012 for trainer ROPS criteria.
FOPS Standards Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer FOPS criteria.
Height - Top of ROPS 12.7 ft
Overall Body Length 26.8 ft
Inside Body Length 18.5 ft
Overall Length 28.9 ft
Wheel Base 13 ft
Rear Axle - Tail 8.5 ft
Ground Clearance 1.6 ft
Dump Clearance 1.7 ft
Loading Height - Empty 10.3 ft
Inside Body Depth - Maximum 4.6 ft
Overall Height - Body Raised 27.1 ft
Operating Width 15.7 ft
Centerline Front Tire Width 10.2 ft
Engine Guard Clearance 1.1 ft
Outside Body Width 12.9 ft
Inside Body Width 11.9 ft
Front Canopy Height 13.5 ft
Rear Axle - Clearance 1.8 ft
Centerline of Rear Dual Tire Width 8.3 ft
Overall Tire Width 12.1 ft
ACHIEVE GREATER PRODUCTIVITY

        
  • Haul your materials faster with an accelerated travel speed.
    •     
  • Put more power to the ground with increased torque.
    •     
  • Enjoy greater productivity while using a more responsive TractionControl System (TCS).
    •     
  • Reduce tire wear with maximum by engaging TCS early in the slip.
    •     
  • Strong, predictable performance helps operators achieve the lowest cost per ton.

        
  • Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
    •     
  • Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
    •     
  • Gain improvements in fuel efficiency with auto-neutral idle.
    •     
  • Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
    •     
  • Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.







        
  • Improvements in accessibility with safe, ground-level access to fuel fill and daily maintenance points.
    •     
  • The Cat® Detect Seat Belt Reminder System monitors seat belt use and alerts the operator if the seat belt isn’t fastened correctly, helping improve safety and reduce the risk of injury on the jobsite.
    •     
  • Superior brake performance meets the latest brake standards—
        ISO 3450:2011.
    •     
  • The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
    •     
  • Sturdy 4-point mounted cabin meets rollover protective structure/
        falling objects protective structure (ROPS/FOPS) standard.
    •     
  • 4-point seat belt provides enhanced safety to the operator.
    •     
  • Seat belt indicator implements both visual and audible alerts to the
        operator when seat belt is not fastened.
    •     
  • Lockout features help the service technician to perform
        maintenance work on the machine with safe mode.
    •     
  • Secondary steering activates automatically in case of primary
        system failure.
    •     
  • Overload speed limiter works with truck payload system to reduce
        machine speed automatically when the truck is overloaded. 


















        
  • Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
    •     
  • The new operator seat placement provides easier operation and comfort to the operator.
    •     
  • Improvements in enlarged views of the work area and its surroundings.
    •     
  • Access connectivity and decrease clutter with more storage areas in the newly designed cab.
    •     
  • Automatic cab temperature controls.
    •     
  • Cat next-generation deluxe seat for better operator comfort.
    •     
  • Shift Lever with integrated fingertip hoist control enables intuitive hoist operation directly from the shift lever for enhanced comfort and productivity

        
  • Integrated systems give you the ability to make timely, fact-based 
    decisions to maximize efficiency, improve productivity, and lower
    costs.
    •     
  • Gain valuable insight into how your machine is performing by continuously
     monitoring and collecting vital machine data via the bronze display with the software Vital Information Management System (VIMS™).  Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent.
    •     
  • Cat Payload - Improved payload accuracy, Cycle segmentation changes, and support next-generation product link radios.
    •     
  • External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
    •     
  • Product Link™ system connects to each machine wirelessly, 
    allowing you to monitor location, hours, fuel use, productivity, idle
    time, and diagnostic codes.
    •     
  • VisionLink®
    wirelessly connects you to your equipment, giving
    you access to essential information you need to know to run your business.
    •     
  • The Cat 770 is MineStar™ ready and includes Cat Product Link
    Elite and VIMS to help optimize equipment management, remote
    monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic 
    failure.
    •     
  • Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire management system works with TPMS for improved tire life. 






        
  • Grouped service points.
    •     
  • Control particulate matter with two engine-mounted diesel oxidation catalyst canisters. (Tier 4)
    •     
  • NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
    •     
  • Parts commonality with other Cat equipment.
    •     
  • Resolve problems before failure occurs with VIMS notifications.
    •     
  • Torque converter stall (autostall) enables quick operating temperatures for best performance life.
    •     
  • All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage. 

        
  • Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
    •     
  • For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
    •     
  • The flat floor body is perfect for metering material, especially when
        feeding the crusher. 
    •     
  • Optimize your body life by selecting a liner package best suited
        for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications. 

Similar Models

772 (07) Off-Highway Truck

772 (07) Off-Highway Truck
775 Off-Highway Truck

775 Off-Highway Truck
775 08 Off-Highway Truck

775 08 Off-Highway Truck