New C280-6 Generator Set (Medium Speed) For Sale in Georgia
Yancey Brands
Hotlines
C280-6 Generator Set (Medium Speed)
C280-6 Generator Set (Medium Speed)

Producing reliable power from 1650 to 1820 ekW at 60 Hz and 2200 to 2425 kVA at 50 Hz, our C280-6 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set meets IMO/EPA Tier 2 emissions.

Get Pricing
Call 877-OWNACAT
Generator Set Specifications
Maximum Rating 1820 ekW (60Hz), 2425 kVA (50Hz)
Minimum Rating 1650 ekW (60Hz), 2200 kVA (50Hz)
Emissions/Fuel Strategy IMO Tier 2
Frequency 50 / 60 Hz
Speed 900 / 1000 rpm
Duty Cycle Prime, Continuous
Engine Model C280-6, I-6,4-Stroke Water-Cooled Diesel
Bore 11 in
Stroke 11.8 in
Displacement 111 in³
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)
Length - Maximum 404 in
Width - Maximum 99.62 in
Height - Maximum 156.6 in
Dry Weight - Genset (maximum) 74970 lb
Cat® Diesel Engine

  • Designed and optimized for Marine EPA Tier 4 or IMO Tier 2 emissions
  • Reliable, rugged, durable design

  • Superior motor starting capability minimizes need for oversizing generator
  • Matched to the performance and output characteristics of Cat engines

  • Fully prototype tested with certified torsional vibration analysis available

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

  • Simple user friendly interface and navigation
  • Provides protection, monitoring, and control of the diesel generator set
  • Redundant shutdown protection
  • 10 inch (254 mm) color monitor to display all engine parameters and alarm annunciation
  • Annunciation of all engine shutdowns, alarms, and status points
  • Start/prelube control switch, fuel control switch and emergency stop buttons
  • Speed control switch with automatic changing to ball head control when a governor failure occurs, if ball head control is available
  • Contacts are available for customer use
  • Selection of local/remote control of engine
  • Selection of idle/rated control of engine
  • Equipped for remote communication
  • Four 4-20mA outputs (programmable)
  • Relay contact signals to the remote monitoring system (summary shutdown, summary alarm, local operation/remote, engine running, PLC failure, fuel control and idle/rated)