New 3606 Generator Set (Medium Speed) For Sale in Georgia
Yancey Brands
Hotlines
3606 Generator Set (Medium Speed)
3606 Generator Set (Medium Speed)

Producing reliable power from 1650 to 2000 ekW at 60 Hz, our 3606 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.

Get Pricing
Call 877-OWNACAT
Generator Set Specifications
Maximum Rating 2000 ekW
Minimum Rating 1650 ekW
Emissions/Fuel Strategy Low Fuel Consumption
Frequency 60 Hz
Speed 900 rpm
Duty Cycle Standby, Prime, Continuous
Engine Model 3606 I-6,4-Stroke Water-Cooled Diesel
Bore 11 in
Stroke 11.8 in
Displacement 111 in³
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)
Length - Maximum 404 in
Width - Maximum 99.62 in
Height - Maximum 156.6 in
Dry Weight - Genset (maximum) 74970 lb
Cat® Diesel Engine

  • Designed and optimized for low fuel consumption
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

  • Superior motor starting capability minimizes need for oversizing generator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency

  • Fully prototype tested with certified torsional vibration analysis available

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • The Caterpillar S.O.S. program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products.
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

The Genset Monitoring System (GMS) provides protection, monitoring, and control for a single 3600 diesel generator set utilizing a digital based control panel housed in an IP55 enclosure. All critical shutdowns are a relay-based protection. Contactors are wired directly to the junction panel when an accessory module is ordered and is factory packaged. Use of the GMS eliminates the need for a separate gauge panel and annunciator panel. Accepts remote signals for starting/interlock, stopping, and emergency stop. All monitored parameters and status signals are available over MODBUS RS485 network. A default Ethernet connection is available for connection.

  • Simple user friendly interface and navigation
  • Provides protection, monitoring, and control of the generator set
  • Redundant shutdown protection
  • 5.7 inch (145 mm) color monitor to display all engine parameters and alarm annunciation
  • Annunciation of all engine shutdowns, alarms, and status points
  • Start/prelube control switch, fuel control switch and emergency stop button
  • Selection of local/remote control of engine
  • Selection of idle/rated control of engine
  • Equipped for remote communication from the panel
  • Relay outputs available: energize to run, energize to stop, air shutoff, prelube, air start and local remote
  • Optional output available for alarms and faults