New 299D3 Compact Track Loader For Sale in Georgia – Yancey Bros. Co.
299D3 Compact Track Loader
299D3 Compact Track Loader
299D3 Compact Track Loader
299D3 Compact Track Loader

The Cat® 299D3 Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, stability and speed to work in a wide range of applications and underfoot conditions.

Gross Power - SAE J1995 98 hp
Net Power - SAE 1349 95 hp
Displacement 232 in³
Bore 3.9 in
Stroke 4.7 in
Net Power 95 hp
Net Power - ISO 9249 95 hp
Engine Model Cat C3.8 DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 246 ft·lbf
Rated Operating Capacities - 35% Tipping Load 3480 lb
Tipping Load 9945 lb
Breakout Force - Tilt Cylinder 7270 lb
Breakout Force - Lift Cylinder 6162 lb
Rated Operating Capacity with Optional Counterweight 5240 lb
Ground Contact Area - With 400 mm/15.7 in Track 2184 in²
Ground Pressure - With 400 mm/15.7 in Track 5.3 psi
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacities - 50% Tipping Load 4970 lb
Ground Contact Area - With 450 mm/17.7 in Track 2463 in²
Ground Pressure - With 450 mm/17.7 in Track 4.7 psi
Operating Weight 11464 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Length - Track on Ground 69.6 in
Overall Length - Track 89.4 in
Height - Top of Cab 83.6 in
Ground Clearance 9.6 in
Departure Angle 33°
Maximum Dump Angle 54°
Vehicle Width (450 mm/17.7 in tracks) 78 in
Turning Radius from Center - Coupler 58.1 in
Rack Back Angle - Maximum Height 81°
Reach - Maximum Lift/Dump 33.6 in
Vehicle Width (400 mm/15.7 in tracks) 76 in
Bucket Pin Reach - Maximum Lift 19.4 in
Bucket Pin Height - Carry Position 7.1 in
Turning Radius from Center - Bucket (racked) 91.1 in
Maximum Reach - With Arms Parallel to Ground 51.9 in
Length - Without Bucket 125.5 in
Length - With Bucket on Ground 154.7 in
Clearance at Maximum Lift and Dump 94.5 in
Bucket Pin Height - Maximum Lift 126.3 in
Maximum Overall Height 158.7 in
Roll Back Angle 25°
Turning Radius from Center - Machine Rear 74 in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44 hp
Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gal/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32 gal/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76 hp
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Travel Speed - Forward or Reverse - Two Speed 8.4 mile/h
Travel Speed - Forward or Reverse - One Speed 5.2 mile/h
Cooling System 4.1 gal (US)
Engine Crankcase 3.5 gal (US)
Fuel Tank 31.7 gal (US)
Hydraulic System 14.5 gal (US)
Hydraulic Tank 10.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Inside Cab* 83 dB(A)
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab** 104 dB(A)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

A standard, fully independent torsion axle suspension combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

  • The Cat® C3.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
  • Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.