New 301.7 CR Mini Hydraulic Excavator For Sale in Georgia

Engine

Net Power 21 hp

Engine Model C1.1

Engine Power 21.6 hp

Bore 3 in

Stroke 3.2 in

Displacement 69 in³

Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (1) Advertised power is tested per the specified standard in effect at the time of manufacture.

Note Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.

Weights

Operating Weight 4222 lb

Minimum Operating Weight with Canopy* 3946 lb

Maximum Operating Weight with Canopy** 4222 lb

EU: CE Plate Weight*** 4167 lb

Note (1) *Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank.

Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.

Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.

Weight Increase from Minimum Configuration

Long Stick 22 lb

Steel Tracks 110 lb

Expandable Undercarriage Standard

Heavy Counterweight 148 lb

Travel System

Travel Speed - High 2.7 mile/h

Travel Speed - Low 1.8 mile/h

Maximum Traction Force - High Speed 2675.2 lbf

Maximum Traction Force - Low Speed 4136.5 lbf

Ground Pressure - Minimum Weight 4 psi

Ground Pressure - Maximum Weight 4.4 psi

Gradeability - Maximum 30 degrees

Service Refill Capacities

Cooling System 1 gal (US)

Engine Oil 1.2 gal (US)

Fuel Tank 5.8 gal (US)

Hydraulic Tank 4.8 gal (US)

Hydraulic System 6.9 gal (US)

Hydraulic System

Pump Flow at 2,400 rpm 17.4 gpm

Operating Pressure - Equipment 3553.4 psi

Operating Pressure - Travel 3553.4 psi

Operating Pressure - Swing 2132.1 psi

Auxiliary Circuit - Primary - Flow 8.7 gpm

Auxiliary Circuit - Primary - Pressure 3553.4 psi

Auxiliary Circuit - Secondary - Flow 3.7 gpm

Auxiliary Circuit - Secondary - Pressure 3553.4 psi

Digging Force - Stick - Standard 2135.7 lbf

Digging Force - Stick - Long 1865.9 lbf

Digging Force - Bucket 3641.9 lbf

Type Load Sensing Hydraulics with Variable Displacement Piston Pump

Swing System

Machine Swing Speed 9.8 r/min

Blade

Width* 39 in

Height 8.9 in

Note *Expanded – 1300 mm (51 in)

Certification - Canopy

Roll Over Protective Structure (ROPS) ISO 12117-2:2008

Tip Over Protective Structure (TOPS) ISO 12117:1997

Top Guard ISO 10262:1998 (Level I)

Dimensions - Standard Stick

Dig Depth 92.5 in

Vertical Wall 70.9 in

Maximum Reach - Ground Level 153.5 in

Maximum Reach 156.3 in

Maximum Dig Height 135 in

Maximum Dump Clearance 96.5 in

Boom In Reach 64.2 in

Tail Swing 25.6 in

Maximum Blade Height 10.6 in

Maximum Blade Depth 10.4 in

Boom Height - Shipping Position 42.9 in

O/A Shipping Height 90.6 in

Swing Bearing - Height 17.4 in

O/A Undercarriage Length 62.6 in

Overall Shipping Length* 142.5 in

Boom Swing - Right 50 °

Boom Swing - Left 65 °

Track Belt/Shoe Width 9.1 in

Track Width - Retracted 39 in

Track Width - Expanded 51.18 in

Minimum Ground Clearance Below Undercarriage 5.5 in

Stick Length 37.8 in

Note *Overall Shipping Length depends on blade position during shipment.

Dimensions - Long Stick

Dig Depth 100 in

Vertical Wall 74.4 in

Maximum Reach - Ground Level 159.8 in

Maximum Reach 162.6 in

Maximum Dig Height 137.4 in

Maximum Dump Clearance 98.8 in

Boom In Reach 63.8 in

Tail Swing 25.6 in

Maximum Blade Height 10.6 in

Maximum Blade Depth 10.4 in

Boom Height - Shipping Position 40.9 in

O/A Shipping Height 90.6 in

Swing Bearing - Height 17.4 in

O/A Undercarriage Length 62.6 in

Overall Shipping Length* 141.3 in

Boom Swing - Right 50 °

Boom Swing - Left 65 °

Track Belt/Shoe Width 9.1 in

Track Width - Retracted 39 in

Track Width - Expanded 51.18 in

Minimum Ground Clearance Below Undercarriage 5.5 in

Stick Length 45.7 in

Note *Overall Shipping Length depends on blade position during shipment.

Sound

Average Exterior Sound Pressure (ISO 6395:2008) 93 dB(A)

Note European Union Directive “2000/14/EC”

Sustainability

Recyclability 95%

ALL DAY COMFORT

Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we've built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

SUSTAINABILITY

The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)