CW34 Pneumatic Roller
CW34 Pneumatic Roller
CW34 Pneumatic Roller
CW34 Pneumatic Roller

The CW34 is an eight wheel pneumatic roller that features a modular ballast system and flexible operating weight of 10 000 kg to 27 000 kg (22,050 lb - 59,525 lb). This machine offers excellent visibility, ECO-mode operation, even compaction, and excels on a variety of materials due to its flexible air-on-the-run capability.

Get Pricing
Operating Weight - Standard Machine Empty 22050 lb
Operating Weight - Maximum Ballast 59525 lb
Operating Weight - Maximum Wet Sand Ballast 35275 lb
Average Weight per Wheel 3571 lb
Operating Weight - No Ballast 22050 lb
Operating Weight - Maximum Water Ballast 28660 lb
Average Weight per Wheel - No Ballast 2755 lb
Average Weight per Wheel - Maximum Ballast 7451 lb
Compaction Width 82 in
Turning Radius - Inside (2) 20 ft
Rolling Width 82 in
Turning Radius - Outside 342 in
Ground Clearance 10 in
Travel Speed - Maximum 12 mile/h
Turning Radius - Inside (1) 240 in
Number of Wheels 8
Bore 4.13 in
Stroke 5 in
Gross Power 133 HP
Engine Model C4.4
Overall Width 85 in
Height - Steering Wheel 96 in
Height - ROPS 118 in
Overall Length 210 in
Maximum Machine Height 118 in
Tires 13/80 R20
Water Spray Tank Capacity 100 gal (US)
Fuel Tank Capacity 71 gal (US)

Eight 13/80 R20 rubber tires provide overall compaction width of 2090 mm (82") with 25 mm (1") overlap.

Ballast options include modular and non-modular steel, sand, and water. The 6.5 metric ton (7.1 U.S. ton) modular steel can be easily added or removed through bolt-on side panels. The internal, non-modular steel consists of 6.1 metric tons (6.7 U.S. ton). Also, a 3 cubic meter (793 gal) water-tight chamber with baffled compartments prevent surge, and balance weight.

Oscillating front and rear tires deliver vertical and horizontal forces that reduce air voids, providing surface uniformity. Heat retention covers trap heat to keep the tires warm and prevent pick-up. They can be easily stored when not in use.

The 13/80 R20 rubber tires can be equipped with the optional air-on-the-run system that enables the operator to quickly adjust tire pressures to increase or decrease static loads for optimal surface quality.

The sliding and pivoting operator station rotates 90° to either side for ultimate comfort and control. The new console design includes an LCD display and push button machine controls that simplify operation for an all-around comfortable operating environment.

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

The C4.4 engine meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards and provides 98 kW (133.2 metric hp).

Standard ECO-mode provides fuel efficiency and reduces sound levels.