New 986 Wheel Loader For Sale in Georgia – Yancey Bros. Co.
986 Wheel Loader
986 Wheel Loader
986 Wheel Loader
986 Wheel Loader

Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.

Get Pricing
Engine Model C15 Cat®
Peak Power Speed 1600
Peak Power Speed - Gross - SAE J1995 456 hp
Engine Power - ISO 14396 449 hp
Net Power - SAE J1349 373 hp
Rated Speed 2000
Rated Speed - 2,000 rpm - EEC 80/1269 373 hp
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) 378 hp
Rated Speed - 2,000 rpm - ISO 9249 373 hp
Rated Speed - 2,000 rpm - ISO 9249 (DIN) 378 hp
Bore 5.4 in
Stroke 6.75 in
Displacement 927 in²
Peak Torque - 1,200 rpm - SAE J1995 1778 lb/ft
Torque Rise 16%
Emissions U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Transmission Type Cat planetary power shift
Forward - 1 5 mile/h
Forward - 2 8 mile/h
Direct Drive - Forward 2 8 mile/h
Direct Drive - Forward 3 14 mile/h
Direct Drive - Forward 4 24 mile/h
Reverse - 1 5 mile/h
Reverse - 2 8 mile/h
Direct Drive - Reverse 2 9 mile/h
Direct Drive - Reverse 3 16 mile/h
Direct Drive - Reverse 4 25.4 mile/h
Operating Weight - Standard 97785 lb
Operating Weight - High Lift 104005 lb
Rated Payload - Standard (Quarry Face) 11 ton (US)
Rated Payload - Loose Material (Standard) 14 ton (US)
Rated Payload - High Lift (Quarry Face) 11 ton (US)
Rated Payload - Loose Material (High Lift) 12.1 ton (US)
Bucket Capacity Range 5-10,3 m³ (6,5-13,5 yd.³)
Cat Truck Match - Standard 770/735/740/745
Cat Truck Match - High Lift 772/773
Lift/Tilt System - Circuit Load Sense
Lift/Tilt System - Pump 2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm 123 gal/min
Relief Valve Setting - Lift/Tilt 4050 psi
Lift Cylinder - Bore 7.5 in
Lift Cylinder - Stroke 45 in
Tilt Cylinder - Bore 6.7 in
Tilt Cylinder - Stroke 28.4 in
Rack Back 4.5 s
Raise 9 s
Dump 3.5 s
Lower 5.2 s
Lower Float Down 4.3 s
Total Hydraulic Cycle Time 21.3 s
Steering System - Circuit Load Sense
Steering System - Pump Piston, variable displacement
Maximum Flow at 1,400 rpm 52 gal/min
Steering Cut Off Pressure 4000 psi
Total Steering Angle 70°
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Front Fixed
Rear Trunnion
Oscillation Angle ±12.5°
Oscillation Angle - Chain Arrangement ±8.5°
Brakes ISO 3450:2011
ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Fuel Tank 141 gal (US)
Fuel Tank - Short Lift 127 gal (US)
Cooling Systems 26 gal (US)
Crankcase 9 gal (US)
Diesel Exhaust Fluid Tank 6 gal (US)
Transmission 20 gal (US)
Axle Oil - Differentials and Final Drives - Front 49 gal (US)
Axle Oil - Differentials and Final Drives - Rear 45 gal (US)
Hydraulic System Factory Fill 87 gal (US)
Hydraulic System - Tank Only 34 gal (US)
Operator Sound Level (ISO 6396) 72 dB(A)
Machine Sound Level (ISO 6395) 112 dB(A)
Note
  • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Level (ISO 6396) 72 dB(A)
Machine Sound Level (ISO 6395) 110 dB(A)
Note
  • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Ground to Top of ROPS 13.5 ft
Ground to Top of Exhaust Stacks 13.3 ft
Ground to Top of Hood 10.7 ft
Ground to Center of Front Axle 3.2 ft
Ground to Fuel Tank Clearance 2.3 ft
Ground to Lower Hitch Clearance 1.5 ft
Reach - Maximum Lift 7.1 ft
Clearance at Maximum Lift 10.1 ft
B-Pin Height - Maximum Lift 16.1 ft
Maximum Overall Height - Bucket Raised 22.4 ft
Rear Axle - Centerline to Bumper 10.3 ft
Wheel Base 12.5 ft
Maximum Overall Length 36.6 ft
Front Axle Centerline to Bucket Tip 13.8 ft
Note
  • All dimensions are approximate.
  • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Top of ROPS 13.5 ft
Ground to Top of Exhaust Stacks 13.3 ft
Ground to Top of Hood 10.7 ft
Ground to Center of Front Axle 3.2 ft
Ground to Fuel Tank Clearance 2.3 ft
Ground to Lower Hitch Clearance 1.5 ft
Reach - Maximum Lift 7.4 ft
Clearance at Maximum Lift 11.6 ft
B-Pin Height - Maximum Lift 17.6 ft
Maximum Overall Height - Bucket Raised 23.9 ft
Rear Axle - Centerline to Bumper 10.3 ft
Wheel Base 12.5 ft
Maximum Overall Length 38 ft
Front Axle Centerline to Bucket Tip 15.3 ft
Note
  • All dimensions are approximate.
  • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Top of ROPS 13.5 ft
Ground to Top of Exhaust Stacks 13.3 ft
Ground to Top of Hood 10.7 ft
Ground to Center of Rear Axle 3.2 ft
Ground to Fuel Tank Clearance 2.3 ft
Ground to Lower Hitch Clearance 1.5 ft
Reach at Maximum Lift 8 ft
Clearance at Maximum Lift 10.7 ft
B-Pin Height at Maximum Lift 15 ft
Maximum Overall Height, Bucket Raised 20.9 ft
Rear Axle Center Line to Bumper 10.3 ft
Wheel Base 12.5 ft
Maximum Overall Length 35 ft
Front Axle Centerline to Bucket Tip 12.2 ft
Ground to Top of ROPS 13.5 ft
Ground to Top of Exhaust Stacks 13.3 ft
Ground to Top of Hood 10.7 ft
Ground to Center of Rear Axle 3.2 ft
Ground to Fuel Tank Clearance 2.3 ft
Ground to Lower Hitch Clearance 1.5 ft
B-Pin Height at Maximum Lift 15 ft
Rear Axle Center Line to Bumper 10.3 ft
Wheel Base 12.5 ft
Maximum Overall Length 35.4 ft
Front Axle Centerline to Bucket Tip 12.6 ft

        
  • The highly responsive Cat C15 engine is built and tested for maximum performance.
  •     
  • Mechanically actuated Electronic Unit Injection (MEUI™) fuel system and ADEM™ A5 electronic control module manage fuel delivery for optimum performance and quick engine response.
  •     
  • Available in aggregate handler configuration with 14-ton payload.
  •     
  • System match efficiency up to 60-ton rigid-frame trucks.

        
  • Best-in-class transmission for long life and consistent, smooth shifting; specifically designed for mining applications.
  •     
  • Moves material more efficiently with improved power and control.
  •     
  • Durable construction withstands the toughest loading conditions and multiple life cycles.
  •     
  • Transmission neutralizer pedal extends service brake life and allows full power during stationary loading.
  •     
  • Load sense hydraulics maximize performance, lower heat and fuel consumption.
  •     
  • Advanced filtration system for extended performance and reliability of the hydraulic system.

        
  • Up to 10% more payload per pass, higher efficiency, and improved pass match.
  •     
  • Field-proven lift arms for enhanced strength, uptime, and excellent visibility.
  •     
  • Load-sensing hydraulic steering with 35-degree articulation for precise positioning.
  •     
  • Maximum responsiveness with Steering and Integrated Control (STIC™), combining directional, gear, and steering controls in a single joystick.
  •     
  • Most advanced payload weight measuring system available.
  •     
  • Performance Buckets for superior digging, higher bucket fill factors, and reduced dig times.
  •     
  • Cat Advansys™ ground engaging tools (GET) protect components and reduce operating costs.
  •     
  • Excellent visibility to the bucket edges and work area.
  •     
  • Convenient, responsive, electro-hydraulic controls increase operator productivity.

        
  • Best-in-class efficiency while truck loading.
  •     
  • Torque converter with lock-up clutch improves travel speed, cycle times.
  •     
  • Engine Idle Shutdown saves fuel from unnecessary idling. Move up to 10% more material per gallon of fuel.
  •     
  • Consistent performance and efficiency with lower system heat.

        
  • Developed to monitor, manage, and enhance your jobsite operations.
  •     
  • Payload provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
  •     
  • Detect enhances awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the jobsite.
  •     
  • VisionLink® wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business.
  •     
  • Gain valuable insight into how your machine or fleet is performing.
  •     
  • Optional Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
*Not legal for trade

        
  • Standard stairway lighting.
  •     
  • Left- and right-hand stairs with 45-degree angle.
  •     
  • Rear vision camera system.
  •     
  • Large front and side windows.
  •     
  • Pressurized cabin with filtered and reduced sound levels.

        
  • Up to 10% lower maintenance costs.
  •     
  • Advanced filtration system for extended performance.
  •     
  • Extended service intervals for fluids and filters.
  •     
  • Ground level or platform access to transmission control valves.
  •     
  • Grouped service points.
  •     
  • Centralized, ground level grease points and remote pressure taps.
  •     
  • Ground electrical service center.
  •     
  • Reduced waste with maintenance-free or extended-maintenance batteries.
  •     
  • Swing-out engine compartment service doors.
  •     
  • Tire pressure monitoring to enhance tire life.
  •     
  • Longer life, rebuildability, and high resale value.
  •     
  • Electro-hydraulic controls.

        
  • Best-in-class operator comfort and ergonomics.
  •     
  • Integrated steering and transmission controls.
  •     
  • Convenient, automatic, inside-the-cab implement kickouts.
  •     
  • Easy-to-use soft detent controls.
  •     
  • Comfort Series III seats with extra thick, contoured cushions.
  •     
  • Air suspension system.
  •     
  • Easy-to-reach levers and controls with six-way adjustment.
  •     
  • Seat-mounted implement pod with STIC steering.
  •     
  • Ergonomic switch placement and displays with large backlit switches and LED indicators.
  •     
  • Two-position rocker switch activates the electro-hydraulic parking brake.
  •     
  • Automatic cab temperature controls.
  •     
  • Precise machine control by load-sensing hydraulic steering system.
  •     
  • Fold-up STIC steer/armrest.

Block Handler

        
  • Delivers stability and durability with an optimized counterweight for block handling applications.
  •     
  • An additional hydraulic valve with the Quick Coupler allows the operator to switch work tools and immediately lock the work tool.
  •     
  • Larger tilt and lift cylinders on the linkage help improve load control and ensure safe and long lasting operation.
  •     
  • Ride control acts as a shock absorber, providing the operator with a smoother ride over rough terrain.
  •     
  • Linkage layout designed to maximize lift capability in block handling application.
  •     
  • High load stresses are absorbed by solid steel lift arms.
  •     
  • Enhanced strength in key pin areas through the use of one-piece castings.
  •     
  • Stress released lift arms increase durability and lengthen time to repair.

Similar Models

910 Compact Wheel Loader

910 Compact Wheel Loader

914 Compact Wheel Loader

914 Compact Wheel Loader

920 Compact Wheel Loader

920 Compact Wheel Loader

903D Compact Wheel Loader

903D Compact Wheel Loader

Cat 906 Compact Wheel Loader

Cat 906 Compact Wheel Loader

Cat 907 Compact Wheel Loader

Cat 907 Compact Wheel Loader

Cat 908 Compact Wheel Loader

Cat 908 Compact Wheel Loader