New 906M Compact Wheel Loader For Sale in Georgia – Yancey Bros. Co.
Yancey Brands
Hotlines
906M Compact Wheel Loader
906M Compact Wheel Loader
906M Compact Wheel Loader
906M Compact Wheel Loader

The Cat® 906M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Call 877-OWNACAT
Buy Now Rent
Engine
Maximum Gross Power 73.2 HP
Engine Model Cat® C3.3B DIT*
Maximum Gross Power - ISO 14396 73.2 HP
Maximum Gross Power - ISO 14396 (metric) 74.2 HP
Rated Net Power - 2,400 rpm - SAE J1349 71.9 HP
Rated Net Power - 2,400 rpm - ISO 9249 72.9 HP
Maximum Gross Torque - ISO 14396 192 ft·lbf
Maximum Net Torque - ISO 9249 191 ft·lbf
Bore 3.7 in
Displacement 201 in³
Stroke 4.7 in
Note (1) Net power ratings are tested at the reference conditions for the specified standard.
Note (2) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4) Flywheel per the SAE reference conditions with the fan at maximum speed.
Note (5) The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Note (6) Stage V engine available for Europe only.
Emissions *The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards.
Operating Weight 12346 lb
Note Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 906M is configured with a 0.9 m³ (1.2 yd³) bucket with bolt-on cutting edge.
Cooling System 4.4 gal (US)
Fuel Tank 13.7 gal (US)
Engine Oil 3 gal (US)
Hydraulic Tank 12.2 gal (US)
Hydraulic System - Including Tank 18.5 gal (US)
Transmission - Gear Box 2.2 gal (US)
Maximum Flow - Implement Pump 19 gal/min
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow 19 gal/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow 31 gal/min
Maximum Working Pressure - Implement Pump 3408 psi
Relief Pressure - Tilt Cylinder Head 4496 psi
Relief Pressure - Tilt Cylinder Rod 2756 psi
3rd Function Maximum Working Pressure 3408 psi
Boost Flow Maximum Pressure 3191 psi
Lift Cylinder, Double Acting - Bore Diameter 3 in
Lift Cylinder, Double Acting - Rod Diameter 2 in
Lift Cylinder, Double Acting - Stroke 27.4 in
Tilt Cylinder, Double Acting - Bore Diameter 3.5 in
Tilt Cylinder, Double Acting - Rod Diameter 2.2 in
Tilt Cylinder, Double Acting - Stroke 16.4 in
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5 s
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height 1.5 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time 9.6 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift 9.6 s
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height 3 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Tipping Load - Straight - ISO 14397-1 8666 lb
Tipping Load - Full Turn - ISO 14397-1 7061 lb
Full Turn Tipping Load 7507 lb
Clearance - Full Lift and 45° Dump 8.24 ft
Reach - Full Lift and 45° Dump 2.34 ft
Steering Articulation Angle - Each Direction 39°
Rated Bucket Capacity 1.2 yd³
Height - Ground to Cab** 8.08 ft
Height - Ground Clearance** 11 in
Length - Wheel Base 7.08 ft
Length - Overall* 17.92 ft
Reach - Bucket at 45°* 2.33 ft
Dig Depth** 3.7 in
Clearance - Bucket at 45° * 8.08 ft
Clearance - Level Bucket** 9.92 ft
Height - Bucket Pin** 10.58 ft
Departure Angle 33°
Turning Radius - Over Bucket 14.5 ft
Turning Radius - Inside of Tires 7.33 ft
Width - Bucket 6.17 ft
Width - Tread Center 4.58 ft
Machine Width 6 ft
Articulation Angle 39°
Dump Angle at Full Lift 45°
Operating Weight 12496 lb
Note (1) *Vary with bucket.
Note (2) **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Height - Ground to Cab** 8.08 ft
Height - Ground Clearance** 11 in
Length - Wheel Base 7.08 ft
Length - Overall* 18.42 ft
Reach - Bucket at 45°* 2.67 ft
Dig Depth** 4.2 in
Clearance - Bucket at 45° * 7.67 ft
Clearance - Level Bucket** 9.92 ft
Height - Bucket Pin** 10.58 ft
Departure Angle 33°
Turning Radius - Over Bucket 14.58 ft
Turning Radius - Inside of Tires 7.33 ft
Width - Bucket 6.17 ft
Width - Tread Center 4.58 ft
Machine Width 6 ft
Articulation Angle 39°
Dump Angle at Full Lift 45°
Operating Weight 12481 lb
Note (1) *Vary with bucket.
Note (2) **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Steering Articulation Angle - Each Direction 39°
Steering Cylinder, Double Acting - Bore Diameter 3.1 in
Steering Cylinder, Double Acting - Rod Diameter 1.4 in
Steering Cylinder, Double Acting - Stroke 11.8 in
Nominal Flow - Steering Pump 12 gal/min
Maximum Working Pressure - Steering Pump 3191 psi
Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
Maximum Steering Torque - 39° (Full Turn) 27747 ft·lbf
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm 3 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left <6 turns
ROPS ROPS: ISO 3471:2008
FOPS FOPS: ISO 3449:2005 Level II
Note (1) Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). Optional Low Sound or Blue Angel selection will reduce this to 99 dB(A).
Note (3) *The measurements were conducted with the cab doors and windows closed.
Forward - Range 1 6 mile/h
Forward - Range 2 12 mile/h
Forward - High Range 22 mile/h
Reverse - High Range 22 mile/h
Reverse - Range 1 6 mile/h
Reverse - Range 2 12 mile/h
Note (1) *Standard tire.
Note (2) Other tire choices available, contact your Cat dealer for details.
Note (3) In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (4) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1) 335/80 R18 XZSL Michelin
Option (2) 340/80 R18 AT-R Firestone
Option (3) 340/80 R18 XMCL Michelin
Option (4) 340/80 R18 TRI2 Nokian
Option (5) 340/80 R18 Bibload Michelin
Option (6) 405/70 R18 SPT9 Dunlop*
Option (7) 12.5/80 R18 Flexport™
Bucket Capacities 0.75-1.5 m3 (1.0-2.0 yd3)
Bucket Capacities - ISO Coupler 0.75-1.5 m3
Bucket Capacities - SSL Style Coupler 1.0-2.0 yd3
General Purpose 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
Light Material 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
Multi-Purpose 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Grapple 0.9 m³ (1.2 yd³) heaped
Note All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
High Performance

With its high full turn tipping loads and breakout forces, the M Series delivers a powerful solution for all customer applications.

State of the art electrohydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

High visibility cab increases comfort with an available deluxe seat, intuitive controls and settings. Optional soft touch pad contains new electronic functions and settings including Implement Modulation and Hystat Aggressiveness, Ride Control, Return to Dig, Lift Kickout, Engine Speed Control, and Rimpull Control. Optional built-in Machine Security System prevents machine theft.

The Cat optimized Z-bar loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Heavy duty axles and 100% diff-lock come standard on both the 20 km/h (12 mph) standard speed machine as well as the 35 km/h (22 mph) high speed option. Ride control is also available as an option, for added comfort and load retention when having to travel longer distances.

Whether using a horizontal style coupler (HPL-ISO or HPL-A) or the Skid Steer Loader (SSL) style coupler, combined with standard flow or optional high flow hydraulics, the Cat Compact Wheel Loaders can use a large range of work tools including hydro mechanical work tools.

The design of the M Series allows quick and easy servicing. Tilt up engine hood and side service doors give exceptional access to the major components safely from ground level. S·O·SSM oil ports and pressure test points enable easy preventative maintenance.