TL642D Telehandler
TL642D Telehandler
TL642D Telehandler
TL642D Telehandler

The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Get Pricing
Engine Model Cat® C3.4B
Gross Power - Basic 100 HP
Note Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight 22002 lb
Rated Load Capacity 6500 lb
Maximum Lift Height 42 ft
Maximum Forward Reach 30 ft
Top Travel Speed 21 mile/h
Capacity at Maximum Reach 700 lb
Frame Leveling 10°
Drawbar Pull - Loaded 19783 lbf
Capacity at Maximum Height 6500 lb
Turning Radius - Over Tires 12 ft
Standard 370/75-28 Air Duraforce
Optional (1) 370/75-28 Foam Duraforce
Optional (2) 13.00 × 24-16 PR Air
Optional (3) 13.00 × 24-12 PR Foam Filled
Optional (4) 13.00 × 24 Solid
Gear Pump Single-section
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770 psi
Auxiliary Hydraulic Pressure 3481 psi
Auxiliary Hydraulic Flow 18 gal/min
Fuel Tank 38.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US)
Hydraulic System 40 gal (US)
Boom Up 15 s
Boom Down 10.3 s
Tele In 9.5 s
Tele Out 16.3 s
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Type (1) Trunnion mounted planetary 55 degree steer axles.
Type (2) High bias limited slip differential on front axle.
Hydraulic IT Coupler Includes Auxiliary Electrics
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Standard Tilt 50 in
Carriages - Dual Fork Positioning 50 in
Carriages - Standard Rotate 50 in
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Side Shift 48 in
Carriages - Wide Rotate 72 in
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Carriages - Wide Tilt 72 in
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Forward 4 speed
Reverse 3 speed